Application module: Shape composition ISO/TS 10303-1742:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

EXPRESS specification:

*)
SCHEMA Shape_composition_mim;

USE FROM Shape_property_assignment_mim;    --  ISO/TS 10303-1032

USE FROM shape_aspect_definition_schema    --  ISO 10303-47
  (composite_shape_aspect,
   composite_group_shape_aspect);

USE FROM shape_dimension_schema    --  ISO 10303-47
  (dimensional_location);
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Shape_property_assignment_mim ISO/TS 10303-1032
shape_aspect_definition_schema ISO 10303-47
shape_dimension_schema ISO 10303-47

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definition

This subclause specifies the MIM entity for this module. The MIM entity and definition is specified below.

5.2.1.1 composite_unit_shape_aspect   EXPRESS-G

A composite_unit_shape_aspect is a type of composite_shape_aspect that implements the ARM concept of Composite_unit_shape_element.

EXPRESS specification:

*)
ENTITY composite_unit_shape_aspect
  SUBTYPE OF (composite_shape_aspect);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Shape_composition_mim
(*


© ISO 2014 — All rights reserved