Application module: Product view definition properties ISO/TS 10303-1034:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

4 Information requirements

This clause specifies the information requirements for the Product view definition properties application module. The information requirements are specified as the Application Reference Model (ARM) of this application module.

NOTE 1  A graphical representation of the information requirements is given in Annex C.

NOTE 2  The mapping specification is specified in 5.1. It shows how the information requirements are met by using common resources and constructs defined or imported in the MIM schema of this application module.

This clause defines the information requirements to which implementations shall conform using the EXPRESS language as defined in ISO 10303-11. The following begins the Product_view_definition_properties_arm schema and identifies the necessary external references.

EXPRESS specification:

*)
SCHEMA Product_view_definition_properties_arm;
(*

4.1 Required AM ARMs

The following EXPRESS interface statements specify the elements imported from the ARMs of other application modules.

EXPRESS specification:

*)
USE FROM Product_view_definition_arm;    --  ISO/TS 10303-1019

USE FROM Product_view_definition_relationship_arm;    --  ISO/TS 10303-1041

USE FROM Property_assignment_arm;    --  ISO/TS 10303-1030
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Product_view_definition_arm ISO/TS 10303-1019
Product_view_definition_relationship_arm ISO/TS 10303-1041
Property_assignment_arm ISO/TS 10303-1030

NOTE 2   See Annex C, Figures C.1and C.2 for a graphical representation of this schema.

4.2 ARM type definition

This subclause specifies the ARM type for this application module. The ARM type and definition is specified below.

4.2.1 product_property_assignment   EXPRESS-G

The product_property_assignment type is an extension of the property_assignment_select type. It adds the data types Product_view_definition and View_definition_relationship to the list of alternate data types.

NOTE  The list of entity data types may be extended in application modules that use the constructs of this module.

EXPRESS specification:

*)
TYPE product_property_assignment = EXTENSIBLE GENERIC_ENTITY SELECT BASED_ON property_assignment_select WITH
   (Product_view_definition,
    View_definition_relationship);
END_TYPE;
(*



*)
END_SCHEMA;  -- Product_view_definition_properties_arm
(*


© ISO 2014 — All rights reserved