Application module: Plib class reference ISO/TS 10303-1291:2008(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

4 Information requirements

This clause specifies the information requirements for the Plib class reference application module. The information requirements are specified as the Application Reference Model (ARM) of this application module.

NOTE 1  A graphical representation of the information requirements is given in Annex C.

NOTE 2  The mapping specification is specified in 5.1. It shows how the information requirements are met by using common resources and constructs defined or imported in the MIM schema of this application module.

The following EXPRESS specification begins the Plib_class_reference_arm schema and identifies the necessary external references.

EXPRESS specification:

*)
SCHEMA Plib_class_reference_arm;
(*

4.1 Required AM ARMs

The following EXPRESS interface statements specify the elements imported from the ARMs of other application modules.

EXPRESS specification:

*)
USE FROM External_class_arm;    --  ISO/TS 10303-1275

USE FROM External_item_identification_assignment_arm;    --  ISO/TS 10303-1128

USE FROM Person_organization_assignment_arm;    --  ISO/TS 10303-1013
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

External_class_arm ISO/TS 10303-1275
External_item_identification_assignment_arm ISO/TS 10303-1128
Person_organization_assignment_arm ISO/TS 10303-1013

NOTE 2   See Annex C, Figures C.1and C.2 for a graphical representation of this schema.

4.2 ARM entity definition

This subclause specifies the ARM entity for this module. The ARM entity is an atomic element that embodies a unique application concept and contains attributes specifying the data elements of the entity. The ARM entity and definition is specified below.

4.2.1 Plib_class_reference   EXPRESS-GMapping table

A Plib_class_reference is a class in a library that is compliant to ISO 13584 (Parts Library).

EXPRESS specification:

*)
ENTITY Plib_class_reference;
  code : STRING;
  supplier_bsu : STRING;
  version : STRING;
END_ENTITY;
(*

Attribute definitions:

code: the class in the PLIB library. The format of this code is defined in ISO 13584-42.

supplier_bsu: the supplier of the class in a PLIB library, in which the class is defined. The format of this specification is defined in ISO 13584-26.

version: the identification of a particular version of a class in a PLIB library. The format of this version is defined in ISO 13584-42.



*)
END_SCHEMA;  -- Plib_class_reference_arm
(*


© ISO 2008 — All rights reserved