Application module: Physical connectivity layout topology requirement ISO/TS 10303-1826:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
   4.3 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Physical_connectivity_layout_topology_requirement_mim;

USE FROM Requirement_decomposition_mim;    --  ISO/TS 10303-1740
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Requirement_decomposition_mim ISO/TS 10303-1740

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM type definition

This subclause specifies the MIM type for this application module. The MIM type and definition is specified below.

5.2.1.1 pcltr_groupable_item   EXPRESS-G

The pcltr_groupable_item type is an extension of the groupable_item type. It adds the data type group_relationship to the list of alternate data types.

EXPRESS specification:

*)
TYPE pcltr_groupable_item = SELECT BASED_ON groupable_item WITH
   (group_relationship);
END_TYPE;
(*

5.2.2 MIM entity definitions

This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.

5.2.2.1 physical_connectivity_layout_topology_link   EXPRESS-G

A physical_connectivity_layout_topology_link is a type of group_relationship that implements the ARM concept of Physical_connectivity_layout_topology_link.

EXPRESS specification:

*)
ENTITY physical_connectivity_layout_topology_link
  SUBTYPE OF (group_relationship);
END_ENTITY;
(*

5.2.2.2 physical_connectivity_layout_topology_node   EXPRESS-G

A physical_connectivity_layout_topology_node is a type of group that implements the ARM concept of Physical_connectivity_layout_topology_node.

EXPRESS specification:

*)
ENTITY physical_connectivity_layout_topology_node
  SUBTYPE OF (group);
END_ENTITY;
(*

5.2.2.3 physical_connectivity_layout_topology_requirement   EXPRESS-G

A physical_connectivity_layout_topology_requirement is a type of group and a type of predefined_requirement_view_definition that implements the ARM concept of Physical_connectivity_layout_topology_requirement.

EXPRESS specification:

*)
ENTITY physical_connectivity_layout_topology_requirement
  SUBTYPE OF (predefined_requirement_view_definition, group);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Physical_connectivity_layout_topology_requirement_mim
(*


© ISO 2018 — All rights reserved