Application module: Physical connectivity layout topology requirement ISO/TS 10303-1826:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
   4.3 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../requirement_decomposition/sys/4_info_reqs.htm#requirement_decomposition_arm.predefined_requirement_view_definition ../physical_connectivity_layout_topology_requirement/sys/4_info_reqs.htm#physical_connectivity_layout_topology_requirement_arm.physical_connectivity_layout_topology_node ../physical_connectivity_layout_topology_requirement/sys/4_info_reqs.htm#physical_connectivity_layout_topology_requirement_arm.physical_connectivity_layout_topology_requirement ../physical_connectivity_layout_topology_requirement/sys/4_info_reqs.htm#physical_connectivity_layout_topology_requirement_arm.physical_connectivity_layout_topology_link


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved