Application module: Part template shape with parameters ISO/TS 10303-1720:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM rule definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

EXPRESS specification:

*)
SCHEMA Part_template_shape_with_parameters_mim;

USE FROM Non_feature_shape_element_mim;    --  ISO/TS 10303-1706

USE FROM Part_template_mim;    --  ISO/TS 10303-1722
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Non_feature_shape_element_mim ISO/TS 10303-1706
Part_template_mim ISO/TS 10303-1722

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM type definitions

This subclause specifies the MIM types for this application module. The MIM types and definitions are specified below.

5.2.1.1 ptswp_external_identification_item   EXPRESS-G

The ptswp_external_identification_item type is an extension of the external_identification_item type. It adds the data type shape_representation to the list of alternate data types.

NOTE  The list of entity data types may be extended in application modules that use the constructs of this module.

EXPRESS specification:

*)
TYPE ptswp_external_identification_item = EXTENSIBLE GENERIC_ENTITY SELECT BASED_ON external_identification_item WITH
   (shape_representation);
END_TYPE;
(*

5.2.1.2 ptswp_requirement_assigned_item   EXPRESS-G

The ptswp_requirement_assigned_item type is an extension of the requirement_assigned_item type. It adds the data type shape_representation to the list of alternate data types.

NOTE  The list of entity data types may be extended in application modules that use the constructs of this module.

EXPRESS specification:

*)
TYPE ptswp_requirement_assigned_item = EXTENSIBLE GENERIC_ENTITY SELECT BASED_ON requirement_assigned_item WITH
   (shape_representation);
END_TYPE;
(*

5.2.2 MIM entity definition

This subclause specifies the MIM entity for this module. The MIM entity and definition is specified below.

5.2.2.1 geometric_template   EXPRESS-G

A geometric_template is a type of part_template_definition that implements the ARM concept of Geometric_template.

EXPRESS specification:

*)
ENTITY geometric_template
  ABSTRACT SUPERTYPE
  SUBTYPE OF (part_template_definition);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Part_template_shape_with_parameters_mim
(*


© ISO 2014 — All rights reserved