Application module: Part collection ISO/TS 10303-1115:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM rule definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

4 Information requirements

This clause specifies the information requirements for the Part collection application module. The information requirements are specified as the Application Reference Model (ARM) of this application module.

NOTE 1  A graphical representation of the information requirements is given in Annex C.

NOTE 2  The mapping specification is specified in 5.1. It shows how the information requirements are met by using common resources and constructs defined or imported in the MIM schema of this application module.

This clause defines the information requirements to which implementations shall conform using the EXPRESS language as defined in ISO 10303-11. The following begins the Part_collection_arm schema and identifies the necessary external references.

EXPRESS specification:

*)
SCHEMA Part_collection_arm;
(*

4.1 Required AM ARM

The following EXPRESS interface statement specifies the elements imported from the ARM of another application module.

EXPRESS specification:

*)
USE FROM Product_occurrence_arm;    --  ISO/TS 10303-1063
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Product_occurrence_arm ISO/TS 10303-1063

NOTE 2   See Annex C, Figures C.1and C.2 for a graphical representation of this schema.

4.2 ARM entity definitions

This subclause specifies the ARM entities for this module. Each ARM application entity is an atomic element that embodies a unique application concept and contains attributes specifying the data elements of the entity. The ARM entities and definitions are specified below.

4.2.1 Collected_item_association   EXPRESS-GMapping table

A Collected_item_association is a type of Product_occurrence_definition_relationship that associates a Product_occurrence with a Collection_definition.

EXPRESS specification:

*)
ENTITY Collected_item_association
  SUBTYPE OF (Product_occurrence_definition_relationship);
  SELF\Product_occurrence_definition_relationship.relating_view : Collection_definition;
WHERE
  WR1: NOT ('PART_COLLECTION_ARM.ASSEMBLY_COMPONENT_RELATIONSHIP' IN TYPEOF(SELF));
END_ENTITY;
(*

Attribute definitions:

relating_view: the Collection_definition that collects the Product_occurrence instances.

Formal propositions:

WR1: there are not Assembly_component_relationship instances.

4.2.2 Collection_definition   EXPRESS-GMapping table

A Collection_definition is a type of Part_view_definition that identifies a collection of parts that are mounted in the same product but may not be assembled together.

Members of the collection are specified with instances of Collected_item_association.

EXAMPLE    Windscreen wipers for a car or a set of kitchen tools, offered as an option of a kitchen top, are examples of collection.

EXPRESS specification:

*)
ENTITY Collection_definition
  SUBTYPE OF (Part_view_definition);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Part_collection_arm
(*


© ISO 2014 — All rights reserved