|
|
Application module:
Interconnect module usage view |
ISO/TS 10303-1686:2018-11(E)
© ISO
|
This clause specifies the EXPRESS schema derived from the mapping
table.
It uses elements from the common resources or from other application
modules and defines the EXPRESS constructs that are specific to this
part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the
application module.
This clause also
specifies the modifications that apply to the constructs
imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application
modules:
-
use of a supertype entity does not make applicable any of its
specializations, unless the specialization is also imported in the
MIM schema;
-
use of a SELECT type does not make applicable any of its listed types
unless the listed type is also imported in the MIM schema.
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined
in Annex B.
EXPRESS specification:
*)
SCHEMA Interconnect_module_usage_view_mim;
USE FROM
Characteristic_mim;
--
ISO/TS 10303-1654
USE FROM
Functional_assignment_to_part_mim;
--
ISO/TS 10303-1674
USE FROM
Functional_usage_view_mim;
--
ISO/TS 10303-1705
USE FROM
Geometric_tolerance_mim;
--
ISO/TS 10303-1051
USE FROM
Non_feature_shape_element_mim;
--
ISO/TS 10303-1706
(*
NOTE 1
The schemas referenced above are specified in the following
part of ISO 10303:
| Characteristic_mim |
ISO/TS 10303-1654 |
| Functional_assignment_to_part_mim |
ISO/TS 10303-1674 |
| Functional_usage_view_mim |
ISO/TS 10303-1705 |
| Geometric_tolerance_mim |
ISO/TS 10303-1051 |
| Non_feature_shape_element_mim |
ISO/TS 10303-1706 |
NOTE 2
See Annex D,
Figures
D.1and D.2
for a graphical representation of this schema.
This subclause specifies the MIM entities for this
module. The MIM entities and definitions are specified below.
A interconnect_module_cutout_segment_surface is a type of
shape_aspect
and of
shape_aspect_relationship
that implements the ARM concept of
Interconnect_module_cutout_segment_surface.
EXPRESS specification:
*)
ENTITY interconnect_module_cutout_segment_surface
SUBTYPE OF (shape_aspect, shape_aspect_relationship);
SELF\shape_aspect_relationship.relating_shape_aspect : edge_segment_vertex;
SELF\shape_aspect_relationship.related_shape_aspect : edge_segment_vertex;
WHERE
WR1: SELF\shape_aspect_relationship.relating_shape_aspect :<>:
SELF\shape_aspect_relationship.related_shape_aspect;
END_ENTITY;
(*
Attribute definitions:
relating_shape_aspect:
specifies a role of the
edge_segment_vertex
for the interconnect_module_cutout_segment_surface.
related_shape_aspect:
specifies a role of the
edge_segment_vertex
for the interconnect_module_cutout_segment_surface.
Formal propositions:
WR1:
The
edge_segment_vertex
instances referenced shall not be the same instance.
A interconnect_module_edge_segment_surface is a type of
shape_aspect
and of
shape_aspect_relationship
that implements the ARM concept of
Interconnect_module_edge_segment_surface.
EXPRESS specification:
*)
ENTITY interconnect_module_edge_segment_surface
SUBTYPE OF (shape_aspect, shape_aspect_relationship);
SELF\shape_aspect_relationship.relating_shape_aspect : edge_segment_vertex;
SELF\shape_aspect_relationship.related_shape_aspect : edge_segment_vertex;
WHERE
WR1: SELF\shape_aspect_relationship.relating_shape_aspect :<>:
SELF\shape_aspect_relationship.related_shape_aspect;
END_ENTITY;
(*
Attribute definitions:
relating_shape_aspect:
specifies a role of the
edge_segment_vertex
for the interconnect_module_edge_segment_surface.
related_shape_aspect:
specifies a role of the
edge_segment_vertex
for the interconnect_module_edge_segment_surface.
Formal propositions:
WR1:
The
edge_segment_vertex
instances referenced shall not be the same instance.
An interconnect_module_interface_terminal is a type of interconnect_module_terminal that implements the
ARM concept of
Interconnect_module_interface_terminal.
EXPRESS specification:
*)
ENTITY interconnect_module_interface_terminal
SUBTYPE OF (interconnect_module_terminal);
END_ENTITY;
(*
An interconnect_module_terminal is a type of
shape_aspect
that implements the ARM
concepts of:
An interconnect_module_terminal may be an
interconnect_module_interface_terminal.
EXPRESS specification:
*)
ENTITY interconnect_module_terminal
SUPERTYPE OF (interconnect_module_interface_terminal)
SUBTYPE OF (shape_aspect);
END_ENTITY;
(*
An interconnect_module_usage_view is a type of
physical_unit
that implements the ARM concept of
Interconnect_module_usage_view.
An interconnect_module_usage_view may be a
layered_interconnect_module_usage_view.
EXPRESS specification:
*)
ENTITY interconnect_module_usage_view
SUPERTYPE OF (layered_interconnect_module_usage_view)
SUBTYPE OF (physical_unit);
END_ENTITY;
(*
An layered_interconnect_module_usage_view is a type of
interconnect_module_usage_view
that implements the ARM concept of
Layered_interconnect_module_usage_view.
EXPRESS specification:
*)
ENTITY layered_interconnect_module_usage_view
SUBTYPE OF (interconnect_module_usage_view);
END_ENTITY;
(*
*)
END_SCHEMA; -- Interconnect_module_usage_view_mim
(*
© ISO 2018 — All rights reserved
