Application module: Geometric tolerance ISO/TS 10303-1051:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definitions
   4.5 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions
     5.2.2 MIM function definitions
     5.2.3 MIM rule definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 5 ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.gps_filtration_type ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.gps_filtration_specification_target ./armexpg5.htm ./armexpg3.htm ./armexpg3.htm ./armexpg6.htm ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.value_with_unit ../shape_composition/sys/4_info_reqs.htm#shape_composition_arm.composite_shape_element ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.angle_data_element ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element_relationship ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.geometric_tolerance_auxiliary_classification_enum ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.collection_plane_orientation ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.geometric_tolerance_auxiliary_classification ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.all_around_shape_element ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.all_around_shape_element_along_collection_plane ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.between_shape_element ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.gps_filter ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.continuous_shape_element ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.projected_zone_definition_with_offset ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.projected_zone_definition ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.gps_filtration_specification ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.runout_zone_definition ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.non_uniform_zone_definition ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.tolerance_zone_definition ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.composite_shape_element_subtypes


Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 5


© ISO 2019 — All rights reserved