Application module: Functional specification ISO/TS 10303-1679:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Functional_specification_mim;

USE FROM Signal_mim;    --  ISO/TS 10303-1745

USE FROM Network_functional_design_view_mim;    --  ISO/TS 10303-1704

USE FROM application_context_schema    --  ISO 10303-41
  (application_context_element);
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Signal_mim ISO/TS 10303-1745
Network_functional_design_view_mim ISO/TS 10303-1704
application_context_schema ISO 10303-41

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM type definitions

This subclause specifies the MIM types for this application module. The MIM types and definitions are specified below.

5.2.1.1 fs_document_reference_item   EXPRESS-G

The fs_document_reference_item type is an extension of the document_reference_item type. It adds the data type representation to the list of alternate data types.

EXPRESS specification:

*)
TYPE fs_document_reference_item = SELECT BASED_ON document_reference_item WITH
   (representation);
END_TYPE;
(*

5.2.1.2 fs_external_identification_item   EXPRESS-G

The fs_external_identification_item type is an extension of the external_identification_item type. It adds the data type functional_specification to the list of alternate data types.

EXPRESS specification:

*)
TYPE fs_external_identification_item = SELECT BASED_ON external_identification_item WITH
   (functional_specification);
END_TYPE;
(*

5.2.2 MIM entity definitions

This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.

5.2.2.1 functional_specification   EXPRESS-G

An functional_specification is a type of representation that implements the ARM concept of Functional_specification.

EXPRESS specification:

*)
ENTITY functional_specification
  SUBTYPE OF (representation);
END_ENTITY;
(*

5.2.2.2 functional_specification_definition   EXPRESS-G

A functional_specification_definition is a type of functional_unit that implements the ARM concept of Functional_specification_definition.

EXPRESS specification:

*)
ENTITY functional_specification_definition
  SUBTYPE OF (functional_unit);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Functional_specification_mim
(*


© ISO 2018 — All rights reserved