Application module: Feature and connection zone | ISO/TS 10303-1671:2018-11(E) © ISO |
This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the application module.
This clause also specifies the modifications that apply to the constructs imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.
EXPRESS specification:
*)
SCHEMA Feature_and_connection_zone_mim;
USE FROM
Shape_feature_mim;
--
ISO/TS 10303-1764
USE FROM
Surface_conditions_mim;
--
ISO/TS 10303-1110
(*
NOTE 1 The schemas referenced above are specified in the following part of ISO 10303:
Shape_feature_mim ISO/TS 10303-1764 Surface_conditions_mim ISO/TS 10303-1110
NOTE 2 See Annex D, Figures D.1and D.2 for a graphical representation of this schema.
This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.
A connection_zone_interface_plane_relationship is a type of shape_aspect and of shape_aspect_relationship that implements the ARM concept of Connection_zone_bare_die_interface_plane_relationship.
EXPRESS specification:
*)
ENTITY connection_zone_interface_plane_relationship
SUBTYPE OF (shape_aspect, shape_aspect_relationship);
UNIQUE
UR1: SELF\shape_aspect.name;
END_ENTITY;
(*
Formal propositions:
UR1: The name shall be unique within a population of connection_zone_interface_plane_relationships.
EXPRESS specification:
*)
ENTITY feature_definition_with_connection_area
SUBTYPE OF (shape_feature_definition);
END_ENTITY;
(*
*)
END_SCHEMA; -- Feature_and_connection_zone_mim
(*
© ISO 2018 — All rights reserved