Application module: Fabrication joint ISO/TS 10303-1668:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
   4.4 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Index

acyclic_passage_terminal_based_fabrication_joint_link
   ARM object definition 4.4.1
Connection_zone_based_fabrication_joint
   ARM object definition 4.3.1
   ARM EXPRESS-G C.2
   mapping specification 5.1.1
connection_zone_based_fabrication_joint
   MIM object definition 5.2.1.1
   MIM EXPRESS-G D.2
fabricated_feature_select
   ARM object definition 4.2.1
   ARM EXPRESS-G C.2
Fabrication_joint
   ARM object definition 4.3.2
   ARM EXPRESS-G C.2
   mapping specification 5.1.2
fabrication_joint
   MIM object definition 5.2.1.2
   MIM EXPRESS-G D.2
Land_arm
   ARM interface 4.1
Land_mim
   MIM interface 5.2
Layered_interconnect_module_with_printed_component_design_arm
   ARM interface 4.1
Layered_interconnect_module_with_printed_component_design_mim
   MIM interface 5.2
Passage_terminal_based_fabrication_joint_link
   ARM object definition 4.3.3
   ARM EXPRESS-G C.2
   mapping specification 5.1.3
passage_terminal_based_fabrication_joint_link
   MIM object definition 5.2.1.3
   MIM EXPRESS-G D.2
product_property_definition_schema
   MIM interface 5.2
Support_resource_arm
   ARM interface 4.1


© ISO 2018 — All rights reserved