|
|
Application module:
Elementary boundary representation |
ISO/TS 10303-1329:2008(E)
© ISO
|
This clause specifies the information requirements for the
Elementary boundary representation
application module. The information requirements are specified as the
Application Reference Model (ARM) of this application module.
NOTE 1 A graphical representation of the information
requirements is given in
Annex C.
NOTE 2 The mapping specification is specified in
5.1. It shows how
the information requirements are met by using common resources and
constructs defined or imported in the MIM schema of this application
module.
The following EXPRESS specification begins the
Elementary_boundary_representation_arm
schema and identifies the necessary external references.
EXPRESS specification:
*)
SCHEMA Elementary_boundary_representation_arm;
(*
The following EXPRESS interface statement specifies the elements
imported from the ARM of another application module.
EXPRESS specification:
*)
USE FROM
Elemental_geometric_shape_arm;
--
ISO/TS 10303-1004
(*
NOTE 1
The schemas referenced above are specified in the following
part of ISO 10303:
| Elemental_geometric_shape_arm |
ISO/TS 10303-1004 |
NOTE 2
See Annex C,
Figures
C.1and C.2
for a graphical representation of this schema.
This subclause specifies the ARM entity for this
module. The ARM entity is an atomic element that
embodies a unique application concept and contains attributes
specifying the data elements of the entity. The ARM
entity and definition is specified below.
An Elementary_brep_shape_representation is a type of
Geometric_model
composed of one or more manifold solid breps each of which is defined with elementary
geometry and complete explicit topology.
The face geometry is restricted to elementary surfaces, and the edge curves to lines, polylines
or conics.
EXPRESS specification:
*)
ENTITY Elementary_brep_shape_representation
SUBTYPE OF (Geometric_model);
END_ENTITY;
(*
*)
END_SCHEMA; -- Elementary_boundary_representation_arm
(*
© ISO 2008 — All rights reserved
