|
|
Application module:
Design material aspects |
ISO/TS 10303-1232:2018-11(E)
© ISO
|
This clause specifies the information requirements for the
Design material aspects
application module. The information requirements are specified as the
Application Reference Model (ARM) of this application module.
NOTE 1 A graphical representation of the information
requirements is given in
Annex C.
NOTE 2 The mapping specification is specified in
5.1. It shows how
the information requirements are met by using common resources and
constructs defined or imported in the MIM schema of this application
module.
This clause defines the information requirements to which implementations shall
conform using the EXPRESS language as defined in ISO 10303-11.
The following begins the
Design_material_aspects_arm
schema and identifies the necessary external references.
EXPRESS specification:
*)
SCHEMA Design_material_aspects_arm;
(*
The following EXPRESS interface statements specify the elements
imported from the ARMs of other application modules.
EXPRESS specification:
*)
USE FROM
Generic_material_aspects_arm;
--
ISO/TS 10303-1681
USE FROM
Product_view_definition_arm;
--
ISO/TS 10303-1019
USE FROM
Shape_property_assignment_arm;
--
ISO/TS 10303-1032
(*
NOTE 1
The schemas referenced above are specified in the following
part of ISO 10303:
| Generic_material_aspects_arm |
ISO/TS 10303-1681 |
| Product_view_definition_arm |
ISO/TS 10303-1019 |
| Shape_property_assignment_arm |
ISO/TS 10303-1032 |
NOTE 2
See Annex C,
Figures
C.1and C.2
for a graphical representation of this schema.
This subclause specifies the ARM type
for this application module. The ARM type and
definition is specified below.
The dma_material_item_select type is an extension
of the
material_item_select type.
It adds the data
types
Product_occurrence_definition_relationship, Product_view_definition, View_definition_relationship, and Shape_element
to the list of alternate data types.
EXPRESS specification:
*)
TYPE
dma_material_item_select =
SELECT
BASED_ON
material_item_select
WITH
(Product_occurrence_definition_relationship,
Product_view_definition,
View_definition_relationship,
Shape_element);
END_TYPE;
(*
*)
END_SCHEMA; -- Design_material_aspects_arm
(*
© ISO 2018 — All rights reserved
