|
|
Application module:
Curve swept solid |
ISO/TS 10303-1659:2006(E)
© ISO
|
This clause specifies the information requirements for the
Curve swept solid
application module. The information requirements are specified as the
Application Reference Model (ARM) of this application module.
NOTE 1 A graphical representation of the information
requirements is given in
Annex C.
NOTE 2 The mapping specification is specified in
5.1. It shows how
the information requirements are met by using common resources and
constructs defined or imported in the MIM schema of this application
module.
The following EXPRESS specification begins the
Curve_swept_solid_arm
schema and identifies the necessary external references.
EXPRESS specification:
*)
SCHEMA Curve_swept_solid_arm;
(*
The following EXPRESS interface statement specifies the elements
imported from the ARM of another application module.
EXPRESS specification:
*)
USE FROM
Elemental_geometric_shape_arm;
--
ISO/TS 10303-1004
(*
NOTE 1
The schemas referenced above are specified in the following
part of ISO 10303:
| Elemental_geometric_shape_arm |
ISO/TS 10303-1004 |
NOTE 2
See Annex C,
Figures
C.1and C.2
for a graphical representation of this schema.
This subclause specifies the ARM entity for this
module. The ARM entity is an atomic element that
embodies a unique application concept and contains attributes
specifying the data elements of the entity. The ARM
entity and definition is specified below.
A Curve_swept_solid is a type of
Geometric_model.
A Curve_swept_solid shall be interpreted as the Curve_swept_solid specified in part 523 of this standard.
EXPRESS specification:
*)
ENTITY Curve_swept_solid
SUBTYPE OF (Geometric_model);
END_ENTITY;
(*
*)
END_SCHEMA; -- Curve_swept_solid_arm
(*
© ISO 2006 — All rights reserved
