Application module: Cable ISO/TS 10303-1653:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../functional_assignment_to_part/sys/4_info_reqs.htm#functional_assignment_to_part_arm.part_terminal ../assembly_module_with_packaged_connector_component/sys/4_info_reqs.htm#assembly_module_with_packaged_connector_component_arm.packaged_connector_component_interface_terminal ../physical_unit_usage_view/sys/4_info_reqs.htm#physical_unit_usage_view_arm.part_usage_view ../cable/sys/4_info_reqs.htm#cable_arm.cable_usage_view ../cable/sys/4_info_reqs.htm#cable_arm.cable_terminal


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved