ISO/TS 10303-1650:2018-11 Bare die


Application module: Bare die	ISO/TS 10303-1650:2018-11(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
4.3 ARM entity definitions
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
          4.2.1 bd_material_item_select
          4.2.2 derived_zone_shape_class
4.3 ARM entity definitions
          4.3.1 Bare_die
          4.3.2 Bare_die_bottom_surface
          4.3.3 Bare_die_edge_segment_surface
          4.3.4 Bare_die_edge_surface
          4.3.5 Bare_die_surface
          4.3.6 Bare_die_template_terminal
          4.3.7 Bare_die_terminal
          4.3.8 Bare_die_terminal_surface_constituent_relationship
          4.3.9 Bare_die_top_surface
          4.3.10 Connection_zone_bare_die_interface_plane_relationship
          4.3.11 Guided_wave_bare_die_terminal
          4.3.12 Minimally_defined_bare_die_terminal
5 Module interpreted model
5.1 Mapping specification
          5.1.1 Bare_die
          5.1.2 Bare_die_bottom_surface
          5.1.3 Bare_die_edge_segment_surface
          5.1.4 Bare_die_edge_surface
          5.1.5 Bare_die_surface
          5.1.6 Bare_die_template_terminal
          5.1.7 Bare_die_terminal
          5.1.8 Bare_die_terminal_surface_constituent_relationship
          5.1.9 Bare_die_top_surface
          5.1.10 Connection_zone_bare_die_interface_plane_relationship
          5.1.11 Guided_wave_bare_die_terminal
          5.1.12 Material_identification
          5.1.13 Minimally_defined_bare_die_terminal
          5.1.14 Part_terminal
5.2 MIM EXPRESS short listing
5.2.1 MIM entity definitions
          5.2.1.1 bare_die
          5.2.1.2 bare_die_bottom_surface
          5.2.1.3 bare_die_edge_segment_surface
          5.2.1.4 bare_die_edge_surface
          5.2.1.5 bare_die_surface
          5.2.1.6 bare_die_template_terminal
          5.2.1.7 bare_die_terminal
          5.2.1.8 bare_die_top_surface
          5.2.1.9 minimally_defined_bare_die_terminal
Annex A MIM short names
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C ARM EXPRESS-G
Annex D MIM EXPRESS-G
Annex E Computer interpretable listings
Annex F Change history
F.1 General
F 2 Changes made in edition 2
F 2.1 Summary of changes
F 2.2 Changes made to the mapping
F 3 Changes made in edition 3
F 3.1 Summary of changes
F 3.2 Changes made to the ARM
F 3.3 Changes made to the MIM
F 4 Changes made in edition 4
F 4.1 Summary of changes
F 4.2 Changes made to the mapping
F 5 Changes made in edition 5
F 5.1 Summary of changes
F 5.2 Changes made to the ARM
Bibliography
Index

Figures

Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1

Tables

Table A.1 — MIM short names of entities
Table E.1 — ARM and MIM EXPRESS listings

Contents

Figures

Tables