Application module: Associative draughting elements ISO/TS 10303-1311:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Associative_draughting_elements_mim;

USE FROM aic_associative_draughting_elements;    --  ISO 10303-520

USE FROM draughting_dimension_schema    --  ISO 10303-101
  (dimension_callout);

USE FROM Draughting_element_mim;    --  ISO/TS 10303-1310

USE FROM draughting_element_schema    --  ISO 10303-101
  (annotation_plane,
   draughting_model_item_definition,
   des_annotation_representation_select,
   draughting_model_item_association,
   tessellated_annotation_occurrence);

USE FROM geometric_model_schema    --  ISO 10303-42
  (geometric_set);

USE FROM presentation_definition_schema    --  ISO 10303-46
  (annotation_curve_occurrence,
   annotation_fill_area_occurrence,
   annotation_point_occurrence,
   annotation_symbol_occurrence,
   annotation_text_occurrence);

USE FROM product_property_definition_schema    --  ISO 10303-41
  (product_definition_shape,
   property_definition,
   shape_aspect,
   shape_aspect_relationship,
   shape_definition);

USE FROM Shape_property_assignment_mim;    --  ISO/TS 10303-1032
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

aic_associative_draughting_elements ISO 10303-520
draughting_dimension_schema ISO 10303-101
Draughting_element_mim ISO/TS 10303-1310
draughting_element_schema ISO 10303-101
geometric_model_schema ISO 10303-42
presentation_definition_schema ISO 10303-46
product_property_definition_schema ISO 10303-41
Shape_property_assignment_mim ISO/TS 10303-1032

NOTE 2   See Annex D, Figure D.1 for a graphical representation of this schema.



*)
END_SCHEMA;  -- Associative_draughting_elements_mim
(*


© ISO 2019 — All rights reserved