Application module: Assembly technology ISO/TS 10303-1649:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.at_material_item_select ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.at_property_assignment_select ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.at_external_identification_item ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.bond_feature ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.at_requirement_assignment_item ../generic_material_aspects/sys/4_info_reqs.htm#generic_material_aspects_arm.material_identification ../generic_material_aspects/sys/4_info_reqs.htm#generic_material_aspects_arm.material_item_select ../part_shape/sys/4_info_reqs.htm#part_shape_arm.general_part_feature ../product_view_definition_reference/sys/4_info_reqs.htm#product_view_definition_reference_arm.product_view_definition_reference_with_local_representation ../physical_component_feature/sys/4_info_reqs.htm#physical_component_feature_arm.physical_component_feature ../component_feature/sys/4_info_reqs.htm#component_feature_arm.component_feature_joint ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_model ../part_view_definition/sys/4_info_reqs.htm#part_view_definition_arm.part_view_definition ../external_item_identification_assignment/sys/4_info_reqs.htm#external_item_identification_assignment_arm.external_identification_item ../property_assignment/sys/4_info_reqs.htm#property_assignment_arm.property_assignment_select ../external_item_identification_assignment/sys/4_info_reqs.htm#external_item_identification_assignment_arm.external_source_identification ../item_definition_structure/sys/4_info_reqs.htm#item_definition_structure_arm.assembly_definition ../feature_and_connection_zone/sys/4_info_reqs.htm#feature_and_connection_zone_arm.connection_zone ../requirement_assignment/sys/4_info_reqs.htm#requirement_assignment_arm.requirement_assignment_item ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.degree_of_freedom ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.assembled_with_bonding ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.assembly_bond_definition ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.assembly_joint ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.connection_zone_based_assembly_joint ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.component_mating_constraint_condition ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.assembled_with_fasteners ../assembly_technology/sys/4_info_reqs.htm#assembly_technology_arm.default_assembly_bond_shape_model


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2019 — All rights reserved