Application module: Assembly shape ISO/TS 10303-1808:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Assembly_shape_mim;

USE FROM Item_definition_structure_mim;    --  ISO/TS 10303-1345

USE FROM Part_shape_mim;    --  ISO/TS 10303-1807

USE FROM product_property_definition_schema    --  ISO 10303-41
  (component_path_shape_aspect);
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Item_definition_structure_mim ISO/TS 10303-1345
Part_shape_mim ISO/TS 10303-1807
product_property_definition_schema ISO 10303-41

NOTE 2   See Annex D, Figure D.1 for a graphical representation of this schema.



*)
END_SCHEMA;  -- Assembly_shape_mim
(*


© ISO 2018 — All rights reserved