Application module: Assembly module with macro component ISO/TS 10303-1640:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../physical_component_feature/sys/4_info_reqs.htm#physical_component_feature_arm.physical_component_terminal ../assembly_module_design/sys/4_info_reqs.htm#assembly_module_design_arm.assembly_module_design_view ../product_occurrence/sys/4_info_reqs.htm#product_occurrence_arm.single_instance ../assembly_module_macro_definition/sys/4_info_reqs.htm#assembly_module_macro_definition_arm.assembly_module_macro_terminal ../assembly_component/sys/4_info_reqs.htm#assembly_component_arm.physical_component ../assembly_module_with_macro_component/sys/4_info_reqs.htm#assembly_module_with_macro_component_arm.assembly_module_macro_component ../assembly_module_with_macro_component/sys/4_info_reqs.htm#assembly_module_with_macro_component_arm.assembly_module_macro_component_join_terminal


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved