Application module: Assembly module with cable component ISO/TS 10303-1644:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definition
   4.3 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition
     5.2.2 MIM subtype constraint definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

(*
ISO/TC 184/SC 4/WG 12 N9412 - ISO/TS 10303-1644 Assembly module with cable component - EXPRESS ARM
Supersedes ISO/TC 184/SC 4/WG 12 N7502
*)



SCHEMA Assembly_module_with_cable_component_arm;

USE FROM Assembly_module_design_arm;    -- ISO/TS 10303-1636

USE FROM Cable_arm;    -- ISO/TS 10303-1653


ENTITY Cable_component
  SUBTYPE OF (Physical_component, Single_instance);
  SELF\Definition_based_product_occurrence.derived_from : Cable_usage_view;
END_ENTITY;

SUBTYPE_CONSTRAINT amwcc_part_terminal_subtypes FOR Part_terminal;
  ONEOF (Assembly_module_terminal,
         Cable_terminal,
         Packaged_part_terminal);
END_SUBTYPE_CONSTRAINT;

END_SCHEMA;  -- Assembly_module_with_cable_component_arm


© ISO 2018 — All rights reserved