Application module: Assembly module with cable component ISO/TS 10303-1644:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definition
   4.3 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition
     5.2.2 MIM subtype constraint definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../cable/sys/4_info_reqs.htm#cable_arm.cable_usage_view ../assembly_component/sys/4_info_reqs.htm#assembly_component_arm.physical_component ../product_occurrence/sys/4_info_reqs.htm#product_occurrence_arm.single_instance ../functional_assignment_to_part/sys/4_info_reqs.htm#functional_assignment_to_part_arm.part_terminal ../assembly_module_with_cable_component/sys/4_info_reqs.htm#assembly_module_with_cable_component_arm.cable_component ../assembly_module_with_cable_component/sys/4_info_reqs.htm#assembly_module_with_cable_component_arm.amwcc_part_terminal_subtypes


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved