Application module: Assembly module usage view ISO/TS 10303-1642:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Assembly_module_usage_view_mim;

USE FROM Functional_assignment_to_part_mim;    --  ISO/TS 10303-1674

USE FROM Part_external_reference_mim;    --  ISO/TS 10303-1711

USE FROM Part_feature_function_mim;    --  ISO/TS 10303-1712
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Functional_assignment_to_part_mim ISO/TS 10303-1674
Part_external_reference_mim ISO/TS 10303-1711
Part_feature_function_mim ISO/TS 10303-1712

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definitions

This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.

5.2.1.1 assembly_module_interface_terminal   EXPRESS-G

An assembly_module_interface_terminal is a type of assembly_module_terminal that implement the ARM concept of Assembly_module_interface_terminal.

EXPRESS specification:

*)
ENTITY assembly_module_interface_terminal
  SUBTYPE OF (assembly_module_terminal);
END_ENTITY;
(*

5.2.1.2 assembly_module_terminal   EXPRESS-G

An assembly_module_terminal is a type of shape_aspect that implement the ARM concepts of:

An assembly_module_terminal may be an assembly_module_interface_terminal.

EXPRESS specification:

*)
ENTITY assembly_module_terminal
  SUPERTYPE OF (assembly_module_interface_terminal)
  SUBTYPE OF (shape_aspect);
END_ENTITY;
(*

5.2.1.3 assembly_module_usage_view   EXPRESS-G

An assembly_module_usage_view is a type of physical_unit that implement the ARM concept of Assembly_module_usage_view. An assembly_module_usage_view may be a Layered_assembly_module_usage_view.

EXPRESS specification:

*)
ENTITY assembly_module_usage_view
  SUBTYPE OF (physical_unit);
END_ENTITY;
(*



*)
END_SCHEMA;  -- Assembly_module_usage_view_mim
(*


© ISO 2018 — All rights reserved