Application module: Area 2D ISO/TS 10303-1631:2010-03(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

EXPRESS specification:

*)
SCHEMA Area_2d_mim;

USE FROM Extended_basic_geometry_mim;    --  ISO/TS 10303-1667

USE FROM Value_with_unit_extension_mim;    --  ISO/TS 10303-1753

USE FROM geometric_model_schema    --  ISO 10303-42
  (circular_area,
   elliptic_area,
   polygonal_area,
   primitive_2d,
   rectangular_area);
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Extended_basic_geometry_mim ISO/TS 10303-1667
Value_with_unit_extension_mim ISO/TS 10303-1753
geometric_model_schema ISO 10303-42

NOTE 2   See Annex D, Figure D.1 for a graphical representation of this schema.



*)
END_SCHEMA;  -- Area_2d_mim
(*


© ISO 2009 — All rights reserved