(* SCHEMA step_merged_ap_schema; *)
-- IN AP238 STEP-NC ENTITY machining_approach_retract_strategy SUBTYPE OF (machining_strategy); WHERE WR1: SELF.description IN [ 'along path', 'approach retract angle', 'approach retract tangent', 'plunge helix', 'plunge ramp', 'plunge toolaxis', 'plunge zigzag' ]; WR2: verify_optional_action_property(SELF, 'tool orientation') AND verify_rep_item_for_action_property(SELF, 'tool orientation', [ 'STEP_MERGED_AP_SCHEMA.DIRECTION' ]); WR3: NOT (SELF.description = 'along path') OR (1 <= get_count_of_relating_amr(SELF, [ 'STEP_MERGED_AP_SCHEMA.MACHINING_TOOLPATH_SEQUENCE_RELATIONSHIP' ])) AND verify_related_type_for_amr(SELF, [ 'STEP_MERGED_AP_SCHEMA.MACHINING_TOOLPATH_SEQUENCE_RELATIONSHIP' ], [ 'STEP_MERGED_AP_SCHEMA.MACHINING_TOOLPATH' ]); WR4: NOT (SELF.description = 'approach retract angle') OR ((verify_required_action_property(SELF, 'travel angle') AND verify_angle_measure_action_property(SELF, 'travel angle')) AND verify_required_action_property(SELF, 'travel length')) AND verify_length_measure_action_property(SELF, 'travel length'); WR5: NOT (SELF.description = 'approach retract tangent') OR verify_required_action_property(SELF, 'travel radius') AND verify_length_measure_action_property(SELF, 'travel radius'); WR6: NOT (SELF.description IN [ 'plunge helix', 'plunge ramp', 'plunge zigzag' ]) OR verify_required_action_property(SELF, 'plunge angle') AND verify_angle_measure_action_property(SELF, 'plunge angle'); WR7: NOT (SELF.description = 'plunge helix') OR verify_required_action_property(SELF, 'plunge radius') AND verify_length_measure_action_property(SELF, 'plunge radius'); WR8: NOT (SELF.description = 'plunge zigzag') OR verify_required_action_property(SELF, 'plunge width') AND verify_length_measure_action_property(SELF, 'plunge width'); END_ENTITY;
|
Generated by STEP Tools® EXPRESS to HTML Converter
2024-09-06T14:00:32-04:00