TYPE length_measure

(* SCHEMA step_merged_ap_schema; *)
TYPE length_measure = REAL;
END_TYPE;

Referenced By

Defintion length_measure is references by the following definitions:
DefinitionType
 abrupt_change_of_surface_normal ENTITY
 cartesian_point ENTITY
 character_glyph_symbol ENTITY
 character_spacing_select SELECT
 clothoid ENTITY
 complex_shelled_solid ENTITY
 conical_surface ENTITY
 cylindrical_pair_value ENTITY
 cylindrical_pair_with_range ENTITY
 cylindrical_point ENTITY
 double_offset_shelled_solid ENTITY
 dupin_cyclide_surface ENTITY
 eccentric_cone ENTITY
 eccentric_conical_volume ENTITY
 entirely_narrow_face ENTITY
 entirely_narrow_solid ENTITY
 entirely_narrow_surface ENTITY
 equivalence_detected_difference_select SELECT
 equivalence_measured_value_select SELECT
 g2_discontinuity_between_adjacent_faces ENTITY
 g2_discontinuous_curve ENTITY
 g2_discontinuous_surface ENTITY
 gear_pair ENTITY
 high_degree_axi_symmetric_surface ENTITY
 high_degree_conic ENTITY
 high_degree_linear_curve ENTITY
 high_degree_planar_surface ENTITY
 inconsistent_curve_transition_code ENTITY
 inconsistent_edge_and_curve_directions ENTITY
 inconsistent_surface_transition_code ENTITY
 intersecting_connected_face_sets ENTITY
 intersecting_loops_in_face ENTITY
 intersecting_shells_in_solid ENTITY
 linear_flexible_and_pinion_pair ENTITY
 low_order_kinematic_pair_value ENTITY
 low_order_kinematic_pair_with_range ENTITY
 measure_value SELECT
 narrow_surface_patch ENTITY
 non_negative_length_measure REAL
 offset_curve_2d ENTITY
 offset_curve_3d ENTITY
 offset_surface ENTITY
 parabola ENTITY
 partly_overlapping_curves ENTITY
 partly_overlapping_edges ENTITY
 partly_overlapping_faces ENTITY
 partly_overlapping_solids ENTITY
 partly_overlapping_surfaces ENTITY
 planar_extent ENTITY
 planar_pair_value ENTITY
 planar_pair_with_range ENTITY
 plane_angle_and_length_pair ENTITY
 polar_point ENTITY
 prismatic_pair_value ENTITY
 prismatic_pair_with_range ENTITY
 rack_and_pinion_pair ENTITY
 rack_and_pinion_pair_value ENTITY
 rack_and_pinion_pair_with_range ENTITY
 right_angular_wedge ENTITY
 right_circular_cone ENTITY
 screw_pair ENTITY
 screw_pair_value ENTITY
 self_intersecting_curve ENTITY
 self_intersecting_loop ENTITY
 self_intersecting_shell ENTITY
 self_intersecting_surface ENTITY
 shelled_solid ENTITY
 solid_with_rectangular_pattern ENTITY
 spherical_point ENTITY
 su_parameters ENTITY
 thickened_face_solid ENTITY
 translational_range_measure SELECT
 trim_condition_select SELECT
 vector ENTITY
 view_volume ENTITY
 wedge_volume ENTITY


[Top Level Definitions] [Exit]

Generated by STEP Tools® EXPRESS to HTML Converter
2024-09-06T14:00:30-04:00