(* SCHEMA step_merged_ap_schema; *)
-- IN AP238 STEP-NC ENTITY drilling_type_operation SUBTYPE OF (machining_operation); WHERE WR1: verify_optional_action_property(SELF, 'overcut length') AND verify_length_measure_action_property(SELF, 'overcut length'); WR2: verify_optional_action_property(SELF, 'cutting depth') AND verify_length_measure_action_property(SELF, 'cutting depth'); WR3: verify_optional_action_property(SELF, 'previous diameter') AND verify_length_measure_action_property(SELF, 'previous diameter'); WR4: (verify_optional_action_property(SELF, 'dwell time bottom') AND verify_rep_type_for_action_property(SELF, 'dwell time bottom', [ 'STEP_MERGED_AP_SCHEMA.MACHINING_DWELL_TIME_REPRESENTATION' ])) AND verify_rep_name_for_action_property(SELF, 'dwell time bottom', [ 'dwell time' ]); WR5: (verify_optional_action_property(SELF, 'feedrate on retract') AND verify_rep_type_for_action_property(SELF, 'feedrate on retract', [ 'STEP_MERGED_AP_SCHEMA.MACHINING_FEED_SPEED_REPRESENTATION' ])) AND verify_rep_name_for_action_property(SELF, 'feedrate on retract', [ 'relative speed' ]); WR6: verify_optional_relating_amr_with_name(SELF, 'machining', [ 'STEP_MERGED_AP_SCHEMA.MACHINING_STRATEGY_RELATIONSHIP' ]) AND verify_related_type_for_amr_with_name(SELF, 'machining', [ 'STEP_MERGED_AP_SCHEMA.MACHINING_STRATEGY_RELATIONSHIP' ], [ 'STEP_MERGED_AP_SCHEMA.DRILLING_TYPE_STRATEGY' ]); END_ENTITY;
|
Generated by STEP Tools® EXPRESS to HTML Converter
2024-09-06T14:00:31-04:00