(* SCHEMA step_merged_ap_schema; *)
-- IN AP238 STEP-NC ENTITY bottom_and_side_milling_operation SUBTYPE OF (milling_type_operation); WHERE WR1: SELF.description IN [ 'roughing', 'finishing' ]; WR2: verify_optional_action_property(SELF, 'axial cutting depth') AND verify_length_measure_action_property(SELF, 'axial cutting depth'); WR3: verify_optional_action_property(SELF, 'radial cutting depth') AND verify_length_measure_action_property(SELF, 'radial cutting depth'); WR4: verify_optional_action_property(SELF, 'allowance side') AND verify_length_measure_action_property(SELF, 'allowance side'); WR5: verify_optional_action_property(SELF, 'allowance bottom') AND verify_length_measure_action_property(SELF, 'allowance bottom'); WR6: NOT (SELF.description = 'roughing') OR verify_required_action_property(SELF, 'allowance side') AND verify_required_action_property(SELF, 'allowance bottom'); END_ENTITY;
|
Generated by STEP Tools® EXPRESS to HTML Converter
2024-09-06T14:00:30-04:00