STEP-NC AP238 Technical Resources
This page provides technical articles for people who are
contributing to the development of the STEP-NC standards. This
information is to be used solely for purposes of standards development
and review. Dave Loffredo is the AP238 editor and can be reached at
loffredo@steptools.com
General questions or comments can be directed to support@steptools.com
AP-238 Specifications
These documents relate to work underway in the STEP-NC forum to prepare a
second edition of AP238 with new capabilities. Documents from the
development of the first edition, which was published in 2007, have been preserved here.
- How to read these STEP AP documents
- AP238 Technical
Corrigendum (TC) [pdf, 500k] - Last updated 2009-03-10, this draft
collects up fixes and small enhancements discovered during testing.
- AP238
Second Edition Overview [317k, pdf] - Last updated 2010-06-18,
this presentation from the NIST
2010 STEP-NC Demonstration describes the fixes and enhancements
in the second edition.
- AP238 Second Edition AIM
EXPRESS [exp, 800k] - Last updated 2011-12-06, this collects up
the TC1 additions and fixes, plus definitions required to support the
AP242/AP203e2/AP214 presentation and GDT drawing information, new
AP242 kinematics, and new AIM subtypes to support the closed-loop
programming model.
- AP238 ARM EXPRESS [exp, 109k]
- Last updated 2006-05-26, this is the original, first edition ARM,
with the ISO14649 definitions, GD&T and other original contents,
but without any of the proposed second edition enhancements. A
web browsable version is also
available.
STEP-NC Training Materials