Application module: Stratum non planar shape ISO/TS 10303-1748:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../stratum_non_planar_shape/sys/4_info_reqs.htm#stratum_non_planar_shape_arm.snps_stratum_shape_model_select ../stratum_non_planar_shape/sys/4_info_reqs.htm#stratum_non_planar_shape_arm.snps_sf_shape_select ../manifold_surface/sys/4_info_reqs.htm#manifold_surface_arm.shell_based_surface_model ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.stratum_average_surface ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.stratum_surface ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.limd_sf_shape_select ../manifold_surface/sys/4_info_reqs.htm#manifold_surface_arm.manifold_surface_shape_representation ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.limd_stratum_shape_model_select ../stratum_non_planar_shape/sys/4_info_reqs.htm#stratum_non_planar_shape_arm.topologically_constrained_manifold_surface_shape_representation ../stratum_non_planar_shape/sys/4_info_reqs.htm#stratum_non_planar_shape_arm.stratum_average_surface_shape_model ../stratum_non_planar_shape/sys/4_info_reqs.htm#stratum_non_planar_shape_arm.stratum_surface_shape_model


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2021 — All rights reserved