Application module: Physical unit 2D design view ISO/TS 10303-1724:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
   4.3 ARM function definitions
   4.4 ARM rule definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definition
     5.2.2 MIM function definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../assembly_structure/sys/4_info_reqs.htm#assembly_structure_arm.next_assembly_usage ../layered_2d_shape/sys/4_info_reqs.htm#layered_2d_shape_arm.planar_projected_shape_model ../physical_unit_2d_shape/sys/4_info_reqs.htm#physical_unit_2d_shape_arm.physical_unit_planar_shape_model ../geometric_model_relationship/sys/4_info_reqs.htm#geometric_model_relationship_arm.geometric_model_relationship ../geometric_model_relationship/sys/4_info_reqs.htm#geometric_model_relationship_arm.geometric_model_relationship ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_model ../support_resource/sys/4_info_reqs.htm#support_resource_arm.label ../contextual_shape_positioning/sys/4_info_reqs.htm#contextual_shape_positioning_arm.geometric_composition_with_operator_transformation ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_coordinate_space ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.cartesian_transformation_2d ../assembly_component/sys/4_info_reqs.htm#assembly_component_arm.assembly_component ../contextual_shape_positioning/sys/4_info_reqs.htm#contextual_shape_positioning_arm.contextual_shape_representation ../physical_unit_2d_design_view/sys/4_info_reqs.htm#physical_unit_2d_design_view_arm.assembly_component_2d_shape_model ../physical_unit_2d_design_view/sys/4_info_reqs.htm#physical_unit_2d_design_view_arm.component_2d_location


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved