Application module: Part template ISO/TS 10303-1722:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
   4.4 ARM rule definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../part_template/sys/4_info_reqs.htm#part_template_arm.plp_material_item_select ../part_and_version_identification/sys/4_info_reqs.htm#part_and_version_identification_arm.part_version ../part_view_definition/sys/4_info_reqs.htm#part_view_definition_arm.part_view_definition ../generic_material_aspects/sys/4_info_reqs.htm#generic_material_aspects_arm.material_item_select ../part_and_version_identification/sys/4_info_reqs.htm#part_and_version_identification_arm.part ../part_template/sys/4_info_reqs.htm#part_template_arm.template ../part_template/sys/4_info_reqs.htm#part_template_arm.template_definition ../part_template/sys/4_info_reqs.htm#part_template_arm.template_version


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2019 — All rights reserved