Application module: Geometric validation property representation ISO/TS 10303-1039:2004(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Application module implementation and usage guide
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_model ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.cartesian_point ../foundation_representation/sys/4_info_reqs.htm#foundation_representation_arm.representation ../measure_representation/sys/4_info_reqs.htm#measure_representation_arm.measure_item ../geometric_validation_property_representation/sys/4_info_reqs.htm#geometric_validation_property_representation_arm.point_or_measure ../geometric_validation_property_representation/sys/4_info_reqs.htm#geometric_validation_property_representation_arm.geometric_validation_property


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2004 — All rights reserved