Application module: General surface appearance ISO/TS 10303-1007:2010-07(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../colour/sys/4_info_reqs.htm#colour_arm.colour ../curve_appearance/sys/4_info_reqs.htm#curve_appearance_arm.curve_appearance ../general_surface_appearance/sys/4_info_reqs.htm#general_surface_appearance_arm.surface_side ../general_surface_appearance/sys/4_info_reqs.htm#general_surface_appearance_arm.control_grid_appearance ../general_surface_appearance/sys/4_info_reqs.htm#general_surface_appearance_arm.boundary_curve_appearance ../general_surface_appearance/sys/4_info_reqs.htm#general_surface_appearance_arm.surface_appearance ../general_surface_appearance/sys/4_info_reqs.htm#general_surface_appearance_arm.surface_related_curve_appearance ../general_surface_appearance/sys/4_info_reqs.htm#general_surface_appearance_arm.segmentation_curve_appearance ../general_surface_appearance/sys/4_info_reqs.htm#general_surface_appearance_arm.silhouette_curve_appearance ../general_surface_appearance/sys/4_info_reqs.htm#general_surface_appearance_arm.surface_colour ../general_surface_appearance/sys/4_info_reqs.htm#general_surface_appearance_arm.parameter_line_appearance ../general_surface_appearance/sys/4_info_reqs.htm#general_surface_appearance_arm.surface_appearance_element


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2010 — All rights reserved