Application module: Fill area style ISO/TS 10303-1672:2010-07(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
   4.3 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.angle_data_element ../colour/sys/4_info_reqs.htm#colour_arm.colour ../curve_appearance/sys/4_info_reqs.htm#curve_appearance_arm.curve_appearance ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.detailed_geometric_model_element ../extended_basic_geometry/sys/4_info_reqs.htm#extended_basic_geometry_arm.vector ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.cartesian_point ../fill_area_style/sys/4_info_reqs.htm#fill_area_style_arm.hatch_style ../fill_area_style/sys/4_info_reqs.htm#fill_area_style_arm.solid_fill_area_style ../fill_area_style/sys/4_info_reqs.htm#fill_area_style_arm.tile_style ../fill_area_style/sys/4_info_reqs.htm#fill_area_style_arm.externally_defined_tile_style ../fill_area_style/sys/4_info_reqs.htm#fill_area_style_arm.user_defined_tile_style ../fill_area_style/sys/4_info_reqs.htm#fill_area_style_arm.user_defined_hatch_style ../fill_area_style/sys/4_info_reqs.htm#fill_area_style_arm.externally_defined_hatch_style ../fill_area_style/sys/4_info_reqs.htm#fill_area_style_arm.fas_detailed_geometric_model_element_subtypes


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2010 — All rights reserved