Application module: Default setting association ISO/TS 10303-1809:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.assigned_shape_property ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.angle_data_element ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shapeable_item ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../default_setting_association/sys/4_info_reqs.htm#default_setting_association_arm.default_draft_angle ../default_setting_association/sys/4_info_reqs.htm#default_setting_association_arm.default_shape_property ../default_setting_association/sys/4_info_reqs.htm#default_setting_association_arm.default_fillet ../default_setting_association/sys/4_info_reqs.htm#default_setting_association_arm.default_thickness ../default_setting_association/sys/4_info_reqs.htm#default_setting_association_arm.default_chamfer ../default_setting_association/sys/4_info_reqs.htm#default_setting_association_arm.default_edge_round


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved