Application module: Construction geometry ISO/TS 10303-1131:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../construction_geometry/sys/4_info_reqs.htm#construction_geometry_arm.constructive_geometry_select ../construction_geometry/sys/4_info_reqs.htm#construction_geometry_arm.constructive_element_select ../foundation_representation/sys/4_info_reqs.htm#foundation_representation_arm.representation ../elemental_topology/sys/4_info_reqs.htm#elemental_topology_arm.edge ../elemental_topology/sys/4_info_reqs.htm#elemental_topology_arm.face ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement ../elemental_topology/sys/4_info_reqs.htm#elemental_topology_arm.connected_face_set ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.curve ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.point ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_model ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.surface ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_coordinate_space ../elemental_topology/sys/4_info_reqs.htm#elemental_topology_arm.connected_edge_set ../construction_geometry/sys/4_info_reqs.htm#construction_geometry_arm.constructive_geometry ../construction_geometry/sys/4_info_reqs.htm#construction_geometry_arm.constructive_geometry_association


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2019 — All rights reserved