Application module: Basic curve ISO/TS 10303-1651:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../basic_curve/sys/4_info_reqs.htm#basic_curve_arm.closed_curve ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.cartesian_point ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.bounded_curve ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.circle ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.curve ../basic_curve/sys/4_info_reqs.htm#basic_curve_arm.curve_transition_code ../basic_curve/sys/4_info_reqs.htm#basic_curve_arm.composite_curve_segment ../basic_curve/sys/4_info_reqs.htm#basic_curve_arm.closed_composite_curve ../basic_curve/sys/4_info_reqs.htm#basic_curve_arm.composite_curve ../basic_curve/sys/4_info_reqs.htm#basic_curve_arm.trimmed_curve ../basic_curve/sys/4_info_reqs.htm#basic_curve_arm.curve_subtypes


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2014 — All rights reserved