Application module: Assembly component placement requirements ISO/TS 10303-1634:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
   4.5 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 2 ../assembly_component_placement_requirements/sys/4_info_reqs.htm#assembly_component_placement_requirements_arm.restriction_basis_item ../assembly_component_placement_requirements/sys/4_info_reqs.htm#assembly_component_placement_requirements_arm.assembly_product_design_object_category_or_group ../assembly_component_placement_requirements/sys/4_info_reqs.htm#assembly_component_placement_requirements_arm.acpr_requirement_assignment_item ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ../requirement_decomposition/sys/4_info_reqs.htm#requirement_decomposition_arm.predefined_requirement_view_definition ../physical_unit_usage_view/sys/4_info_reqs.htm#physical_unit_usage_view_arm.part_feature ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../group/sys/4_info_reqs.htm#group_arm.group ../requirement_assignment/sys/4_info_reqs.htm#requirement_assignment_arm.requirement_assignment_item ../requirement_decomposition/sys/4_info_reqs.htm#requirement_decomposition_arm.predefined_requirement_view_definition ../assembly_component_placement_requirements/sys/4_info_reqs.htm#assembly_component_placement_requirements_arm.assembly_product_design_object_category ../assembly_component_placement_requirements/sys/4_info_reqs.htm#assembly_component_placement_requirements_arm.assembly_spacing_type ../assembly_component_placement_requirements/sys/4_info_reqs.htm#assembly_component_placement_requirements_arm.item_restricted_requirement ../assembly_component_placement_requirements/sys/4_info_reqs.htm#assembly_component_placement_requirements_arm.assembly_spacing_requirement ../assembly_component_placement_requirements/sys/4_info_reqs.htm#assembly_component_placement_requirements_arm.assembly_group_spacing_requirement ../assembly_component_placement_requirements/sys/4_info_reqs.htm#assembly_component_placement_requirements_arm.acpr_predefined_requirement_view_definition_subtypes


Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 2


© ISO 2018 — All rights reserved